Batt Wash

Also known as Kiln Wash or Shelf Primer.

How to apply:

Mix same weight in water to the powder, apply to your kiln shelf with a Haik Brush, let dry then add a second coat with the brush strokes at right angles to the first coat. Use only on the upper most side of the shelf.

It is advisable to put your shelf through a dry firing (a bisque will do) before taking it to glaze temperatures.

This batt wash will last for several firings or until there is a glaze accident, and areas can be touched up without re-washing the entire shelf if needed.

For advice and further reading read our 'Using Raw Materials' PDF.

Al2O3 100%.*

*Typical analysis supplied by supplier

Batt Wash contains <1% crystalline silica which when inhaled may cause long term lung damage, therefore we recommend wearing a FFP3/P3 Mask and working in a well ventilated area. Keep working areas free of dust by cleaning up with a damp sponge.

In keeping with our overall general advice, we suggest wearing full PPE when handling raw materials. This includes a mask, safety
glasses, and gloves. We also suggest working in a well ventilated area.

It is a sensible precaution for children not to work with raw materials.

See the SDS in the product attachments for more information.

• Batt Wash SDS (PDF)